High-performance motors, electronic components, flight systems, accessories for FPV enthusiasts, professional builders and wholesale buyers.
From high-performance motors and ESCs to flight controllers, power systems and essential accessories, we provide quality components for demanding FPV builds.
Whether you're a hobbyist, professional pilot or a wholesale customer, our products are selected to deliver reliability, efficiency and exceptional flight performance.
Readytosky 2806.5 1300Kv is an affordable motor for 7" long range copters. The motor bell has small protrusions on the top to reduce the chance of propeller slippage. They use 20cm long 18AWG cables.
Key Features
Size: 2806.5
Kv: 1300
Weight: 57g (including cable)
Dimensions: φ34.5*20.5mm
Mounting holes: 19mm M3
Cables: 200mm 18AWG
Configuration: 12N14P
Package Includes
1x Motor
1x Screw Set
With over a year of technological advancements, we have accelerated the development of the SPECTER F722 PRO FC in 2024. This flight controller incorporates a high-performing STM32 F722 main control and MPU6000 gyroscope for a precise flying experience. Additionally, all external devices are compatible with direct plug-in connection for convenient setup.
Features:
The main control adopts STM32F722 high-performance processor, with a computing speed of up to 216 MHz, providing smoother control, better hand feel, and faster response speed.
The flight control gyroscope uses high-performance MPU6000 to improve the stability of use
Full module direct plug-in connection, plug and play, no soldering pads required, achieving modularity.
16MB large-capacity black box to ensure adequate recording of flight data.
Equipped with two sets of camera signal outputs, the front and rear cameras can be switched through the Betaflightsetting mode.
Specifications:
Flight controller: HGLRC-SPECTER F722 PRO flight controller
Flight control firmware: HGLRCF722 MINI
MCU: STM32F722
GYRO：MPU6000
OSD:AT7456E
Barometer: DPS310
Black box: 16MB
UARTS: 5
BEC: 10V2A/5V2.5A
Flight control size: 37mmx34mmx9.8mm
Installation hole position: 30.5x30.5mm, M3
Weight：8.5g
F405 V3 Flight Control FC
Project Name: F405 V3 Flight Controller
Installation Size: 30.5mm*30.5mm
Weight: 13g
STM32 F405 microcontroller
Drag and drop OSD configured through Betaflight
Gyroscope: MPU6500
Supports receivers such as CRSF/SBUS/IBUS/XBUS/SUMD/Spketorum 1024/2048 etc
BEC: 5V3A/9V3A
Car video filter (only 5V to VTX and camera)
Suitable models: 5 inches, 6 inches, 7 inches, 8 inches, 9 inches, 10 inches, 13 inches, 15 inches, traversing aircraft/drones, etc
BLS-60A V3 4in1 ESC
Input Voltage: 2-6S LiPO
Size: 30.5*30.5mm
Aperture: 30.5 * 30.5mm
Firmware: BLS J_H_30REV16_7
Mounting hole: M4
Input voltage: LIPO 2-6S
Continuous current: 60A
Maximum current: 70A (5 seconds)
Processor: EFM8BB21F16G
Weight: 13g
Contact
Please fill out this form to inquire.